The technical standards for low-pressure casting of aluminum alloy wheels include pre-stressed tensioning, filling, charging, motor rated power, grinding tool heating temperature, pouring temperature and grinding tool coating.
(1) Preload and preload rate
The pre-working pressure is the working pressure required when the metal surface is raised to the water gate. The rising rate of the metal material liquid in the tube should be increased as fast as possible, and the metal material liquid should be prevented from splashing when entering the water conservancy gate.
(2) Filling working pressure and filling rate
Filling working pressure is the working pressure required to fill the metal material liquid to the top of the casting. In the filling process, the rising rate of the working pressure of the metal surface is the filling rate.
(3) Working pressure and working pressure increase rate
The metal material liquid fills the bone cavity, and then the working pressure is raised again to make the forged crystal condense under a certain working pressure. The working pressure is called the crystal working pressure. The higher the crystal body pressure, the higher the actual effect of folding, and the denser the final forging structure. However, it is impossible to improve the quality of castings according to the working pressure of the crystals of the castings.
(4) Holding time
The working pressure of the cavity is raised to the working pressure of the crystal and maintained for a period of time under the working pressure of the crystal. The time required until the casting is completely condensed is called the maintenance time. If the storage period is insufficient, the casting is not easy to completely dry out, and all or part of the metal material liquid in the casting will flow to the wholesale, resulting in empty castings: if the holding time is too long, the castings will last too long. Not only will it reduce the yield of the processing technology, but it will also cause the castings to be frozen (blocking pouring), so that the castings cannot be selected for maintenance time.
(5) Forging temperature and pouring temperature
Low-pressure casting of aluminum alloy profile wheels for trolleys has certain regulations on the operating temperature of metal materials. The operating temperature of metal materials is generally controlled at 350500℃, and reaches 400520℃ when casting thick and complicated parts.
The application temperature of low-pressure aluminum casting liquid on the wheel of the aluminum alloy profile of the trolley is discussed, and it is confirmed that the lower the pressure film, the higher the pressure film.
(6) Architectural coatings
In order to improve the service life and quality of castings, the coating must be kept symmetrical, and the thickness of the coating should be determined based on the smoothness of the surface of the casting and the cooling direction of the casting.
We are engaged in the production and independent import and export of aluminum alloy wheel in china, with more than 2,0000 models of aluminum alloy wheels, about 100,000 inventories, and fast delivery. We provide custom wheels and generation production services, you can provide us with a wheel style map, our designers will design you a beautiful and high quality wheel, welcome to contact us!
If you don't find the wheel style you need, you can send an email to jihoowheels@jihoosh.com and we will send you the wheel style you need according to your description!We will provide you with quality China wheel and excellent service.